Ciscomotors C-Max Manuel d'utilisateur télécharger pdf (Page 13)

Page 13

7. REGULATION BELT TRANSMISSION

The tension of belt must be done very carefully

1. Slightly little the 4 fix screws of

bracelet (Fig.32)

2. Insert an Allen key 8 m / m in the seat

(Fig32-1 point 2) and rotate counter-

clockwise torque of 400 Nm (40kgf / m)

3. Tighten the 4 Allen using the cross

method the specified torque

• TORQUE: 12Nm (1,2 kgf/m)

Figure 32-1

CAUTION:

Control the tension as Fig.32-2

1. Tension too taut it’s cause of early usury

of bearing

2. Tension too loose it’s cause of exessive

consumpion of belt.

Figure.32

Figure.32-2

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Ciscomotors C-Max Manuel d'utilisateur Page 13