Ciscomotors C-Max Instructions d'exploitation télécharger pdf (Page 20)

Pag. 20

6.3 DISASSEMBLY/ASSEMBLY STARTER

Fig.18

1. Remove the air duct see the chapter 6.2

2. Remove 4 screw (Fig.18)

3. Remove the bolt (Fig.19)

4. Remove the pulley

CAUTION

NOT REMOVE THE SPRING (fig.21)

1. Install the pulley and tighten the screw

(Fig. 19) to the specified torque

TORQUE : 10Nm( 1 kgf/m)

2. Insert the starter into the cooling fan with

open grafts (Fig.20)

3. Tighten the screw (Fig.18) to the

specified torque

TORQUE: 6Nm( 0.6 kgf/m)

Fig.19

Fig.20 Fig.21

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Ciscomotors C-Max Instructions d'exploitation Page 20